JN0-637높은통과율시험대비공부자료 - JN0-637완벽한공부문제

Fast2test는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. Juniper인증 JN0-637시험을 등록하신 분들은 바로Fast2test의Juniper인증 JN0-637덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.

Juniper JN0-637 시험요강:

주제	소개
주제 1	Multinode High Availability (HA): In this topic, aspiring networking professionals get knowledge about multinode HA concepts. To pass the exam, candidates must learn to configure or monitor HA systems.
주제 2	Troubleshooting Security Policies and Security Zones: This topic assesses the skills of networking professionals in troubleshooting and monitoring security policies and zones using tools like logging and tracing.
주제 3	Advanced Network Address Translation (NAT): This section evaluates networking professionals' expertise in advanced NAT functionalities and their ability to manage complex NAT scenarios.
주제 4	Logical Systems and Tenant Systems: This topic of the exam explores the concepts and functionalities of logical systems and tenant systems.
주제 5	Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.
주제 6	Automated Threat Mitigation: This topic covers Automated Threat Mitigation concepts and emphasizes implementing and managing threat mitigation strategies.
주제 7	Advanced Policy-Based Routing (APBR): This topic emphasizes on advanced policy-based routing concepts and practical configuration or monitoring tasks.

>> JN0-637높은 통과율 시험대비 공부자료 <<

JN0-637완벽한 공부문제 & JN0-637자격증덤프

Juniper JN0-637 시험을 어떻게 통과할수 있을가 고민중이신 분들은Fast2test를 선택해 주세요. Fast2test는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Juniper JN0-637시험대비 덤프는Juniper JN0-637시험을 간단하게 패스하도록 힘이 되어드립니다. Fast2test 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.

최신 JNCIP-SEC JN0-637 무료샘플문제 (Q103-Q108):

질문 # 103
You want to test how the device handles a theoretical session without generating traffic on the Junos security device.
Which command is used in this scenario?

A. show security flow session
B. request security policies check
C. show security policies
D. show security match-policies

정답：B

설명：
The request security policies check command allows you to simulate a session through the SRX device, checking the security policy action that would apply without needing to send real traffic. This helps in validating configurations before actual deployment. For more details, see Juniper Security Policies Testing.
The command request security policies check is used to test how a Junos security device handles a theoretical session without generating actual traffic. This command is useful for validating how security policies would be applied to a session based on various parameters like source and destination addresses, application type, and more.
* Explanation of Answer A (request security policies check):
* This command allows you to simulate a session and verify which security policies would be applied to the session. It's a proactive method to test security policy configurations without the need to generate real traffic.
* Example usage:
bash
request security policies check from-zone trust to-zone untrust source 10.1.1.1 destination 192.168.1.1 protocol tcp application junos-https Juniper Security Reference:
* Security Policies Check: This command provides a way to simulate and verify security policy behavior without actual traffic. Reference: Juniper Security Policy Documentation.

질문 # 104
Which two types of source NAT translations are supported in this scenario? (Choose two.)

A. translation of IPv4 hosts to IPv6 hosts with or without port address translation
B. translation of one IPv6 subnet to another IPv6 subnet without port address translation
C. translation of one IPv4 subnet to one IPv6 subnet with port address translation
D. translation of one IPv6 subnet to another IPv6 subnet with port address translation

정답：A,C

질문 # 105
Exhibit

You configure a traceoptions file called radius on your returns the output shown in the exhibit What is the source of the problem?

A. An incorrect password is being used.
B. The RADIUS server IP address is unreachable.
C. The authentication order is misconfigured.
D. The RADIUS server suffered a hardware failure.

정답：D

질문 # 106
Exhibit

You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-
1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?

A. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
B. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
C. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
D. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.

정답：D

질문 # 107
Exhibit:

You are asked to ensure that Internet users can access the company's internal webserver using its FQDN.
However, the internal DNS server's A record only points to the webserver's private address.
Referring to the exhibit, which two actions are required to complete this task? (Choose two.)

A. Configure proxy ARP on ge-0/0/3.
B. Disable the DNS ALG.
C. Configure static NAT for both the DNS server and the webserver.
D. Configure destination NAT for both the DNS server and the webserver.

정답：A,C

설명：
In the scenario where internal users are trying to access the company's web server via its FQDN but the DNS server resolves to a private IP, two key actions are needed:
* Static NAT (Answer B): Since the internal DNS server resolves the web server to its private IP address (10.10.10.4/24), you need to configure static NAT for both the DNS server and the webserver. This will ensure that requests coming from the internet will be translated to the web server's public IP (203.0.113.4) and the DNS server's public IP (203.0.113.2).
Example Command:
bash
Copy code
set security nat static rule-set public-to-private from zone untrust
set security nat static rule-set public-to-private rule dns-server match destination-address 203.0.113.2/32 set security nat static rule-set public-to-private rule dns-server then static-nat-prefix 10.10.10.2/32 set security nat static rule-set public-to-private rule web-server match destination-address 203.0.113.4/32 set security nat static rule-set public-to-private rule web-server then static-nat-prefix 10.10.10.4/32
* Proxy ARP (Answer D): The SRX needs to respond to ARP requests for the public IP addresses of both the DNS and webserver on the interface facing the internet (ge-0/0/3). This allows the SRX to handle requests directed at the public IPs.
Example Command:
bash
Copy code
set interfaces ge-0/0/3 unit 0 family inet proxy-arp interface-address 203.0.113.2/32 set interfaces ge-0/0/3 unit 0 family inet proxy-arp interface-address 203.0.113.4/32 These two configurations allow external users to access the internal web server via its public IP, as resolved by the DNS server.

질문 # 108
......

Fast2test의Juniper인증 JN0-637덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. Fast2test의Juniper인증 JN0-637덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.

JN0-637완벽한 공부문제: https://kr.fast2test.com/JN0-637-premium-file.html